HP Latex 3000 Users Guide - Page 205

Maintenance operations for all substrates (continued) Frequency Maintenance operation Cross-reference Part number and/or description Clean and grease the service station transmission and rods Clean and grease the service station transmission and rods on page 270 Grease and oil kit, included in the Printer Maintenance kit. Gloves (not provided) Empty the drop detector ink vessel Empty the drop detector ink vessel on page 271 Replace the rubber blade Replace the rubber blade on page 252 Clean the carriage rails and replace the oiler foams Clean the carriage rails and replace the oiler foams on page 216 HP Latex 3x00 Printer Cleaning Kit and Carriage Rail Cleaning Tool, provided with your printer Grease the printhead primers Grease the printhead primers on page 273 Grease and oil kit, included in the Printer Maintenance kit. Replace the rocker pads Replace the rocker pads on page 337 Every 1500 liters of ink: check and replace if required Replace curing fan and resistors Replace substrate output spindle lever Replace bearings Every 3000 liters (approx. once every 5 years) 3000 liters can be reached by printing 480,000 m² with 4 passes, or 320,000 m² with 6 passes, or 190,000 m² with 8 passes To be done by a service engineer. Call your service representative (see HP Customer Care Centers on page 409). When required Check and clean printheads Check and clean the printheads on page 160 Check the printer for dust and aerosol Check the printer for dust and aerosol on page 277 Clean lint-free cloth and distilled water Check the print output areas for ink droplets or condensation Check the printer for dust and aerosol on page 277 Clean lint-free cloth and distilled water Clean and check the substrateadvance sensor Clean the substrate-advance sensor HP Latex 3x00 Printer Cleaning Kit, on page 204 provided with your printer Replace a pinchwheel submodule Replace a pinchwheel submodule on page 278 CZ056-67097: Pinch assembly, included in the HP Latex 3000 Series Standard Uptime Kit (D4J02A) Replace a primer Replace a primer on page 280 CZ056-67396 for HP Latex 3000/3100/3500. 1HA07-67018 for HP Latex 3200/3600: Primer and latch, included in the HP Latex 3000 Series Standard Uptime Kit (D4J02A) Replace the aerosol module fans Replace the aerosol fan module on page 286 CZ056-67246: Aerosol top case assembly, included in the HP Latex 3000 Series Standard Uptime Kit (D4J02A) Replace the drying fans array Replace the drying fans array on page 290 CZ056-67023: Drying fan case right or CZ056-67024: Drying fan case left, both included in the HP Latex 3000 Series Standard Uptime Kit (D4J02A) Replace the drying lamps Replace the drying lamps on page 295 When required, use CZ056-67322: Drying NIR lamp, included in the HP Latex 3000 Series Standard Uptime Kit (D4J02A) ENWW Summary of maintenance operations 199