HP M3035xs HP LaserJet M3027/M3035 MFP - User Guide for Model Numbers CC476A/C - Page 167
Table 11-1, Control-panel messages continued
UPC - 883585038534
View all HP M3035xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Table 11-1 Control-panel messages (continued) Control panel message Description Recommended action or go to www.hp.com/support/LJM3027mfp or www.hp.com/support/LJM3035mfp.) 22 Embedded I/O buffer overflow To continue touch OK Too much data was sent to the embedded HP Jetdirect print server. Touch OK to print the transferred data. (Some data might be lost.) 22 Parallel I/O buffer overflow To continue Too much data was sent to the parallel port. Touch OK to clear the error message. (Data touch OK will be lost.) Check for a loose cable connection, and be sure to use a high-quality cable. Some nonHP parallel cables might be missing pin connections or might otherwise not conform to the IEEE-1284 specification. Go to www.hp.com/support/LJM3027mfp or www.hp.com/support/LJM3035mfp. 22 USB I/O buffer overflow To continue touch OK Too much data was sent to the USB buffer. Touch OK to clear the error message. (Data will be lost.) 30.1.YY Scanner failure An error has occurred in the scanner. Turn the device off and then on. If this message persists, contact an HPauthorized service or support provider. (See the HP support flyer, or go to www.hp.com/ support/LJM3027mfp or www.hp.com/ support/LJM3035mfp.) 40 Bad serial transmission To continue touch OK A serial data error (parity, framing, or line Touch OK to clear the error message. (Data overrun) occurred as data was being sent by will be lost.) the computer. 40 EIO bad transmission To continue The connection between the device and the touch OK EIO card in the specified slot has been broken. Touch OK to clear the error message and continue printing. 40 Embedded I/O bad transmission To continue touch OK A temporary printing error has occurred. Turn the device off, and then turn the device on. If this message persists, contact an HPauthorized service or support provider. See the HP support flyer, or go to www.hp.com/ support/LJM3027mfp or www.hp.com/ support/LJM3035mfp. 41.3 - Load tray To use another tray, The specified tray does not contain the touch OK specified media size. Touch OK to use a tray that contains media of the correct size. 41.3 - Load tray : , The specified tray is loaded with media that is longer or shorter in the feed direction than the size configured for the tray. Touch OK to display Tray Size. Reconfigure the size in a tray so that the device will use a tray that is loaded with the size of media required for the print job. If the message does not clear automatically from the control-panel display, turn the device off, and then turn the device on. 41.X Error To continue touch OK A temporary printing error occurred. Touch OK to clear the error. If the error is not cleared, turn the device off, and then turn the device on. If this message persists, contact an HPauthorized service or support provider. (See the HP support flyer, or go to www.hp.com/ ENWW Control-panel messages 155