HP M3035xs HP LaserJet M3027/M3035 MFP - User Guide for Model Numbers CC476A/C - Page 208
Solve receiving problems, If the fax is sending very slowly
UPC - 883585038534
View all HP M3035xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Faxes you send are not arriving at the receiving fax machine. Cause Solution the fax guide), and check the Result column for jobs with a Pending designation. NOTE: If the fax is sending very slowly, see "Faxes are transmitting or being received very slowly" in Initial Setup menu on page 29. Solve receiving problems Incoming fax calls are not being answered by the fax (no fax detected). Cause Solution The rings-to-answer setting might not be set correctly. Check the rings-to-answer setting. See the fax guide for information about changing the setting. The telephone cord might not be connected properly, or the Check the installation. Make sure you are using the telephone telephone cord is not working. cord that came with the device. The telephone line might not be working. Disconnect the fax cable from the telephone jack, and then connect a telephone. Make a phone call to ensure that the telephone line is working. A voice-messaging service might be interfering with the ability Do one of the following: to answer calls. ● Discontinue the messaging service. ● Get a telephone line dedicated to fax calls. ● Decrease the rings-to-answer setting for the fax to a number less than the rings-to-answer for the voice mail. See the fax guide for information about changing the setting. Faxes are transmitting or being received very slowly. Cause Solution You might be sending or receiving a very complex fax, such as Complex faxes take longer to be sent or received. one with many graphics. The receiving fax machine might have a slow modem speed. The device fax only sends the fax at the fastest modem speed the receiving fax machine can use. The resolution at which the fax was sent or is being received is very high. A higher resolution typically results in better quality, but also requires a longer transmission time. If you are receiving the fax, call and ask the sender to decrease the resolution and resend the fax. If you are sending, decrease the resolution or change the Page Content mode setting. See the fax guide for information about changing the settings. A poor telephone-line connection is forcing the device fax and Cancel and resend the fax. Have the telephone company the sending or receiving fax machine to slow down the check the telephone line. transmission to adjust for errors. 196 Chapter 11 Problem solving ENWW