HP M5025 HP LaserJet M5025/M5035 MFP - Software Technical Reference (external) - Page 160

● Send TrueType as Bitmap. (available only in the HP PCL 6 and PCL 5 drivers) Send True Type as Bitmap provides an alternative for software programs that have trouble using TrueType fonts for special graphic aspects such as shading, rotation, or slanting. The setting is Disabled (off) by default. The TrueType fonts are converted to bitmap soft fonts before downloading. When Enabled, the driver sends TrueType fonts to the printer as outlines, which retains the standard format (outline) of the fonts. ● Graphics Mode. (available only in the HP PCL 5 driver) Use the Graphics Mode feature to select one of the following settings: ● Send Graphics as Vector. Select this setting to send graphics to the device as a combination of HP Graphics Language, version 2 (HP-GL/2), and raster images. This setting might produce higher-quality output. It is the default setting. ● Send Graphics as Raster. Select this setting to send all graphics to the device as images composed of individual dots. This setting might improve printing speed in some cases. Layout Options The Layout Options setting contains the Page Order setting. Page Order specifies the order in which the pages of the document are printed. Front to Back prints the document so that page 1 prints first. Back to Front prints the document so that page 1 prints last. NOTE The page-ordering operation works on whole sheets of media rather than on individual logical pages. Accordingly, if Pages per Sheet (on the Finishing tab) is greater than one, the ordering of logical pages on a physical sheet of media does not change. HP drivers for Windows 140 Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows ENWW