HP M5025 HP LaserJet M5025/M5035 MFP - Software Technical Reference (external) - Page 176

NOTE The Back Cover options are not available when the Booklet Printing Layout setting is enabled on the Finishing tab. The back cover setting is unavailable, because this page would be printed in the middle of a booklet. The Source is: setting specifies the source tray to use for adding a back cover to the document. The list of source trays depends on the device accessories that are installed. Any optional trays that are installed through the Device Settings tab also appear here. The Type is: drop-down menu shows all of the media types that the device supports. NOTE Use the same size of media for the entire print job. All Use Different Paper/Covers options use the last Size is: setting selected in any one of the Use Different Paper/Covers options. When you change the type and source of the media and covers, the settings remain configured until you close the software program. Document preview image The document preview image is a line-drawn image of a page that represents graphics and text. The document preview image is always oriented so that the contents of the page are right-side-up. Move the cursor over the document preview image to change the cursor from an arrow to a gloved hand. Toggle between portrait and landscape page orientation by clicking the image. Figure 5-11 Document preview image Print Quality The Print Quality group box is shown in the following figure. HP drivers for Windows 156 Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows ENWW