HP M5025 HP LaserJet M5025/M5035 MFP - User Guide - Page 230

Scattered lines, Blurred print, Media, and trays, Operating, environment, Administration

Page 230 highlights

Scattered lines 1. Make sure that the type and quality of the media you are using meet HP specifications. See Media and trays. 2. Make sure that the environmental specifications for the device are being met. See Operating environment. 3. Turn over the stack in the tray. Also, try rotating the stack 180°. 4. Open the Administration menu at the device control panel. Open the Print Quality submenu and change the Toner Density setting. See Print Quality menu. 5. Open the Administration menu at the device control panel. On the Print Quality submenu, open Optimize and set Line Detail=On. Blurred print 1. Make sure that the type and quality of the media you are using meet HP specifications. See Media and trays. 2. Make sure that the environmental specifications for the device are being met. See Operating environment. 3. Turn over the stack in the tray. Also, try rotating the stack 180°. 4. Do not use media that already has been run through the device. 5. Decrease the toner density. Open the Administration menu at the device control panel. Open the Print Quality submenu and change the Toner Density setting. See Print Quality menu. 6. Open the Administration menu at the device control panel. On the Print Quality submenu, open Optimize and set High Transfer=On. See Print Quality menu. 218 Chapter 11 Problem solving ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300

Scattered lines
1.
Make sure that the type and quality of the media you are using meet HP specifications. See
Media
and trays
.
2.
Make sure that the environmental specifications for the device are being met. See
Operating
environment
.
3.
Turn over the stack in the tray. Also, try rotating the stack 180°.
4.
Open the
Administration
menu at the device control panel. Open the
Print Quality
submenu and
change the
Toner Density
setting. See
Print Quality menu
.
5.
Open the
Administration
menu at the device control panel. On the
Print Quality
submenu, open
Optimize
and set
Line Detail=On
.
Blurred print
1.
Make sure that the type and quality of the media you are using meet HP specifications. See
Media
and trays
.
2.
Make sure that the environmental specifications for the device are being met. See
Operating
environment
.
3.
Turn over the stack in the tray. Also, try rotating the stack 180°.
4.
Do not use media that already has been run through the device.
5.
Decrease the toner density. Open the
Administration
menu at the device control panel. Open
the
Print Quality
submenu and change the
Toner Density
setting. See
Print Quality menu
.
6.
Open the
Administration
menu at the device control panel. On the
Print Quality
submenu, open
Optimize
and set
High Transfer=On
. See
Print Quality menu
.
218
Chapter 11
Problem solving
ENWW