HP Metal Jet 3D User Guide - Page 81
HP Smart Stream Build Manager does not handle Process Parameters. It can only use the, Workflow
View all HP Metal Jet 3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Workflow Process Parameters directly accesses the default print settings through the printer's public application programming interface (API). The default print profile settings can be used as they are or customized for printing. The client software generates a job ticket containing print data such as job settings, models and packing information. The job ticket is then transmitted to the printer where it passes through firmware validation before queuing for print. Activation Process Parameters are activated by default. Client application The client application is usually a build preparation software (Gravity, Materialise Magics, or Autodesk Netfabb for example). It can connect to the printer and read machine information such as the job list, print settings, supplies status etc. Print settings are customizable and you can create new profiles. The software can also be used to efficiently arrange the models in the virtual build platform. NOTICE: HP Smart Stream Build Manager does not handle Process Parameters. It can only use the default parameters in the default printing modes. Process Parameters configuration The Process Parameters configuration table contains the list of process parameters along with the corresponding ranges, defaults, and units. Table 4-3 Process Parameters for the HP Metal Jet S100 Printer Settings Default value Minimum Maximum Units Step Binder saturation pass 1 100 0 130 % 1 Binder saturation pass 2 Layer thickness 100 0 150 % 1 50 35 140 μm 1 Print temperature 70/651 40 80 ºC 1 Thermal compensation X, Y and Z 1.0 Dimensional offset erosion X and 0 Y 1.0 1.01 2 % 0.0001 0 500 μm 1 Core-shell control point 1 Core-shell control point 2 3000 0 10,000 μm 1 4500 0 10,000 μm 1 Core-shell saturation for shell 100 0 150 % 1 Core-shell saturation for core 100 0 150 % 1 1 Default values are dependent on the type of powder used. 2 Maximum value allowed for the dimensional compensation slope is 1.0075. Process Parameters for the HP Metal Jet S100 Curing Station Settings Curing temperature Default value 120/1301 Minimum 100 Maximum 130/135 Units C Step 1 Workflow 77