HP Mini 110-3800 HP Mini 210 Maintenance and Service Guide - Page 49
WWAN module, Remove the Phillips PM2.0×3.0 screw
View all HP Mini 110-3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Remove the WLAN module: 1. Disconnect the black WLAN antenna cable (1) from the WLAN module "Main" terminal. 2. Disconnect the gray WLAN antenna cable (2) from the WLAN module "Aux" terminal. 3. Remove the Phillips PM2.0×3.0 screw (3) that secures the WLAN module to the system board. (The WLAN module tilts up.) 4. Remove the WLAN module (4) by pulling the module away from the slot at an angle. NOTE: WLAN modules are designed with a notch (5) to prevent incorrect insertion. Reverse this procedure to install a WLAN module. WWAN module Description HP lc2000 HSPA Mobile Broadband Module For use in Argentina, Bolivia, Canada, Chile, Colombia, Ecuador, El Salvador, Guatemala, Honduras, Mexico, New Zealand, Nicaragua, Panama, Paraguay, Peru, Thailand, the United States, and Venezuela Spare part number 612599-001 Component replacement procedures 41