HP Mini 110-3800 HP Mini 210 Maintenance and Service Guide - Page 54

If it is necessary to replace the hard drive bracket, follow these steps

Get HP Mini 110-3800 PDF manuals and user guides View all HP Mini 110-3800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

4. Remove the battery (see Battery on page 37). 5. Remove the service access cover (see Service access cover on page 38). Remove the hard drive: 1. Remove the Phillips PM2.0x5.0 screw (1) that secures the hard drive to the computer. 2. Disconnect the hard drive connector cable (2). 3. Pull up on the hard drive tab (3), and then remove the hard drive from the hard drive bay at an angle. 4. If it is necessary to replace the hard drive bracket, follow these steps: a. Disconnect the cable adapter (1) from the hard drive. b. Remove the four Phillips PM3.0×3.0 screws (2) that secure the hard drive bracket to the drive. 46 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
4.
Remove the battery (see
Battery
on page
37
).
5.
Remove the service access cover (see
Service access cover
on page
38
).
Remove the hard drive:
1.
Remove the Phillips PM2.0x5.0 screw
(1)
that secures the hard drive to the computer.
2.
Disconnect the hard drive connector cable
(2)
.
3.
Pull up on the hard drive tab
(3)
, and then remove the hard drive from the hard drive bay at an
angle.
4.
If it is necessary to replace the hard drive bracket, follow these steps:
a.
Disconnect the cable adapter
(1)
from the hard drive.
b.
Remove the four Phillips PM3.0×3.0 screws
(2)
that secure the hard drive bracket to the
drive.
46
Chapter 4
Removal and replacement procedures