HP Mini 110-3800 HP Mini 210 Maintenance and Service Guide - Page 52
RTC battery
View all HP Mini 110-3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2. Remove the memory module (3) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (4) to prevent incorrect insertion. Reverse this procedure to install the memory module. RTC battery Description RTC battery Spare part number 599516-001 Before removing the real-time clock (RTC) battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the service access cover (see Service access cover on page 38). Remove the RTC battery: 1. Lift the edge (1) of the battery from the system board. 44 Chapter 4 Removal and replacement procedures