HP Mini 210-3001xx HP Mini 210, HP Mini 110, and Compaq Mini CQ10 Maintenance - Page 56
Memory module, Remove the Phillips M2.0×3.0 screw
View all HP Mini 210-3001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4. Remove the battery (see Battery on page 44). 5. Remove the service door (see Service door on page 45). Remove the WWAN module: 1. Disconnect the red WWAN antenna cable (1) from the WWAN module "Main" terminal. 2. Disconnect the blue WWAN antenna cable (2) from the WWAN module "Aux" terminal. 3. Remove the Phillips M2.0×3.0 screw (3) that secures the WWAN module to the system board. (The WWAN module tilts up.) 4. Remove the WWAN module (4) by pulling the module away from the slot at an angle. NOTE: WWAN modules are designed with a notch (5) to prevent incorrect insertion. Reverse this procedure to install a WWAN module. Memory module Description 2 GB memory module (PC3 10600 1333 MHz, single channel) Spare part number 621565-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 48 Chapter 4 Removal and replacement procedures