HP Mini 210-3001xx HP Mini 210, HP Mini 110, and Compaq Mini CQ10 Maintenance - Page 79
Remove the two Phillips M2.0x4.0 screws, that secure the heat sink to the system board.
View all HP Mini 210-3001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
4. Remove the fan (3) from the system board. NOTE: Due to the adhesive quality of the thermal material between the fan and system board components, you may need to move the fan from side to side to detach it from the system board. Remove the heat sink: 1. Remove the two Phillips M2.0x4.0 screws (1) that secure the heat sink to the system board. Component replacement procedures 71
4.
Remove the fan
(3)
from the system board.
NOTE:
Due to the adhesive quality of the thermal material between the fan and system board
components, you may need to move the fan from side to side to detach it from the system board.
Remove the heat sink:
1.
Remove the two Phillips M2.0x4.0 screws
(1)
that secure the heat sink to the system board.
Component replacement procedures
71