HP Model 745 HP Model 745 Industrial Controller Owner's Guide - Page 184
Accessing the Boot Console Interface, power it back on.
View all HP Model 745 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
NOTE: NOTE: The Boot Console Interface Accessing the Boot Console Interface Accessing the Boot Console Interface To access the boot console interface, follow these steps: This procedure should be done by a system administrator with root user privileges. 1 Close any files and applications on your workstation. 2 In a terminal window, enter the following command: reboot -h 3 When the system has completely shut down, power off the system then power it back on. If Autoboot is turned off, the boot sequence automatically stops at the boot console Main Menu. If Autoboot is turned on, you will see the following messages: Processor is starting Autoboot process. To discontinue, press any key within 10 seconds. If Autoboot and Autosearch are both turned on, you will see the following messages: Processor is booting from first available device.To discontinue, press any key within 10 seconds. If you are using a power-saving monitor, you will have less than 10 seconds from the time this message appears to press a key. Power saving monitors usually indicate the presence of a live video sync signal through the power LED on the monitor. When the LED is on, press ESC . B-6