HP Model 745 HP Model 745 Industrial Controller Owner's Guide - Page 200

NOTE: The Boot Console Interface Displaying the Current Memory Configuration Displaying the Current Memory Configuration The memory command shows the memory configuration table. To display the current memory configuration for your system, from the Information Menu of the boot console interface, follow the directions in "Accessing the Boot Console Interface" earlier in this chapter. Once you are in the Boot Console Interface Main Menu, type: Main Menu: Enter command > information This places you in the Information Menu. From here type: Information Menu: Enter command > memory The screen displays status and configuration information for the memory modules installed in your workstation. Memory Information Example If a memory card failure is detected during power-on selftest, the following message is displayed on the console (after completing all selftests) and the autoboot/autosearch process is automatically stopped: WARNING: One or more memory banks were not configured due to a SIMM size mismatch or a SIMM failure. For more details, use the MEMORY command in the INFORMATION menu. The above condition occurs only after the testing and successful configuration of at least one memory card. B-22