HP OMEN 15-ce000 Maintenance and Service Guide - Page 52
Memory card reader board
View all HP OMEN 15-ce000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Memory card reader board NOTE: The memory card reader board spare part kit does not include the connector cable. Description Memory card reader board (for use only on computer models equipped with an Nvidia N17E GPU) Memory card reader board (for use only on computer models equipped with an Nvidia N17P GPU) Memory card reader board connector cable Spare part number 929470-001 929471-001 934752-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the memory card reader board, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36), and then remove the following components: a. Hard drive (see Hard drive on page 31). b. Speakers (see Speakers on page 40). Remove the memory card reader board: 1. Disconnect the connector cable from the system board (1). 2. Remove the Phillips PM2.0×3.4 screw (2) that secures the board to the computer. 3. Remove the memory card reader board from the computer (3). Reverse this procedure to install the memory card reader board. 42 Chapter 6 Removal and replacement procedures for authorized service provider parts