HP OMEN 15-ce000 Maintenance and Service Guide - Page 55
Hinge covers, Remove the four black Phillips PM2.0×3.0 screws and the four Phillips PM2.0×5.7 screws
View all HP OMEN 15-ce000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Hinge covers NOTE: The hinge covers are spared separately for the left and right sides. Description Left hinge cover Right hinge cover Spare part number 929474-001 929475-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the hinge covers, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). Remove the hinge covers: 1. Remove the four black Phillips PM2.0×3.0 screws and the four Phillips PM2.0×5.7 screws (1) that secure the hinge covers to the computer. 2. Remove the hinge covers using a rotating motion toward the rear of the computer (2). Reverse this procedure to install the hinge covers. Component replacement procedures 45