HP OMEN 15-ce000 Maintenance and Service Guide - Page 78
Display hinges
View all HP OMEN 15-ce000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Display hinges Description Display hinges Spare part number 929464-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the display hinges, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36), and then remove the following components: a. Hinge covers (see Hinge covers on page 45). b. System support brackets (see System support brackets on page 46). c. Fans (see Fans on page 49). d. Heat sink (see Heat sink on page 53). e. System board (see System board on page 58). f. Display assembly (see Display assembly on page 61). g. Display bezel (see Display bezel on page 66). Remove the display hinges: 1. Remove the six Phillips broadhead 2.4×3.2 screws (1) securing the hinges to the display assembly. 68 Chapter 6 Removal and replacement procedures for authorized service provider parts