HP OMEN 15-ce000 Maintenance and Service Guide - Page 66
Power button board
View all HP OMEN 15-ce000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Power button board NOTE: The power button board does not include the power button board connector cable. Description Power button board Power button board connector cable Spare part number 929468-001 929448-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the power button board, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36), and then remove the following components: a. Hinge covers (see Hinge covers on page 45). b. System support brackets (see System support brackets on page 46). c. Fans (see Fans on page 49). d. Heat sink (see Heat sink on page 53). Remove the power button board: 1. Disconnect the power button board cable from the system board (1). 2. Remove the two Phillips PM2.0×3.5 screws (2) that secure the power button board to the computer. 56 Chapter 6 Removal and replacement procedures for authorized service provider parts