HP OMEN 15-ce000 Maintenance and Service Guide - Page 69
Lift the left edge of the system board at an angle, Remove the screw bracket
View all HP OMEN 15-ce000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
(7): TouchPad cable (8): Power button board cable (9): Speaker cable 2. Remove the three Phillips PM2.0×3.4 screws and the Phillips PM1.9×5.7 screw (1). 3. Remove the screw bracket (2). 4. Lift the left edge of the system board at an angle (1) but do not remove the board. 5. Disconnect the USB board connector cable from the underside of the system board (2). Component replacement procedures 59
(7):
TouchPad cable
(8):
Power button board cable
(9):
Speaker cable
2.
Remove the three Phillips PM2.0×3.4 screws and the Phillips PM1.9×5.7 screw
(1)
.
3.
Remove the screw bracket
(2)
.
4.
Lift the left edge of the system board at an angle
(1)
but do not remove the board.
5.
Disconnect the USB board connector cable from the underside of the system board
(2)
.
Component replacement procedures
59