HP OMEN 15-dh1000 Maintenance and Service Guide - Page 54

Hard drive, Remove the battery see

Page 54 highlights

Hard drive Table 6-4 Hard drive and drive cover descriptions and part numbers Description Hard drive, 2 TB, 5400 rpm, 7 mm Hard drive, 1 TB, 5400 rpm, 7 mm Hard drive, 500 GB, 5400 rpm, 7 mm Hard drive cover Spare part number 912487-855 762990-005 778186-005 L22534-001 Before removing the hard drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 32). 2. Remove the optical drive (see Optical drive on page 33). 3. Remove the bottom cover (see Bottom cover on page 37). 4. Remove the battery (see Battery on page 40). Remove the hard drive: 1. Disconnect the hard drive cable from the system board ZIF connector (1). 2. Lift the hard drive out of the computer (2). 44 Chapter 6 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

Hard drive
Table 6-4
Hard drive and drive cover descriptions and part numbers
Description
Spare part number
Hard drive, 2 TB, 5400 rpm, 7 mm
912487-855
Hard drive, 1 TB, 5400 rpm, 7 mm
762990-005
Hard drive, 500 GB, 5400 rpm, 7 mm
778186-005
Hard drive cover
L22534-001
Before removing the hard drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
32
).
2.
Remove the optical drive (see
Optical drive
on page
33
).
3.
Remove the bottom cover (see
Bottom cover
on page
37
).
4.
Remove the battery (see
Battery
on page
40
).
Remove the hard drive:
1.
Disconnect the hard drive cable from the system board ZIF connector
(1)
.
2.
Lift the hard drive out of the computer
(2)
.
44
Chapter 6
Removal and replacement procedures for authorized service provider parts