HP OMEN 15-dh1000 Maintenance and Service Guide - Page 56
Solid-state drive, Remove the Phillips M2.0 × 3.0 screw
![]() |
View all HP OMEN 15-dh1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Solid-state drive Table 6-5 Solid-state drive descriptions and part numbers Description 256 GB, PCIe, NVMe 256 GB, SATA-3, TLC 128 GB, SATA-3, TLC Spare part number L22730-001 L22729-001 L22728-001 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 32). 2. Remove the optical drive (see Optical drive on page 33). 3. Remove the bottom cover (see Bottom cover on page 37). 4. Remove the battery (see Battery on page 40). Remove the solid-state drive: ▲ Remove the Phillips M2.0 × 3.0 screw (1), and then pull the solid-state drive module from the socket (2). Reverse this procedure to install the solid-state drive. 46 Chapter 6 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-omen-15dh1000-maintenance-service-guide-c389a31/56.png)