HP OMEN 15-dh1000 Maintenance and Service Guide - Page 57

Solid-state drive bracket and connector board, Remove the two Phillips M2.0 × 3.0 screws

Get HP OMEN 15-dh1000 PDF manuals and user guides View all HP OMEN 15-dh1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Solid-state drive bracket and connector board Table 6-6 Solid-state drive bracket, connector board, and cable descriptions and part numbers Description Spare part number Solid-state drive bracket L22535-001 Solid-state drive connector board L22542-001 Solid-state drive cable L22527-001 Before removing the solid-state drive bracket and connector board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 32). 2. Remove the optical drive (see Optical drive on page 33). 3. Remove the bottom cover (see Bottom cover on page 37). 4. Remove the battery (see Battery on page 40). 5. Remove the solid-state drive (see Solid-state drive on page 46). Remove the solid-state drive bracket and connector board: 1. Disconnect the cable from the system board ZIF connector (1). 2. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the board and bracket to the computer. 3. Remove the board from the computer (3). 4. Remove the bracket from the computer (4). Reverse this procedure to install the solid-state drive bracket and connector board. Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Solid-state drive bracket and connector board
Table 6-6
Solid-state drive bracket, connector board, and cable descriptions and part numbers
Description
Spare part number
Solid-state drive bracket
L22535-001
Solid-state drive connector board
L22542-001
Solid-state drive cable
L22527-001
Before removing the solid-state drive bracket and connector board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
32
).
2.
Remove the optical drive (see
Optical drive
on page
33
).
3.
Remove the bottom cover (see
Bottom cover
on page
37
).
4.
Remove the battery (see
Battery
on page
40
).
5.
Remove the solid-state drive (see
Solid-state drive
on page
46
).
Remove the solid-state drive bracket and connector board:
1.
Disconnect the cable from the system board ZIF connector
(1)
.
2.
Remove the two Phillips M2.0 × 3.0 screws
(2)
that secure the board and bracket to the computer.
3.
Remove the board from the computer
(3)
.
4.
Remove the bracket from the computer
(4)
.
Reverse this procedure to install the solid-state drive bracket and connector board.
Component replacement procedures
47