HP OMEN 15-dh1000 Maintenance and Service Guide - Page 61

Optical drive board, Disconnect the cable from the ZIF connector on the optical drive board

Get HP OMEN 15-dh1000 PDF manuals and user guides View all HP OMEN 15-dh1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Optical drive board Table 6-10 Optical drive board and cable descriptions and part numbers Description Optical drive board Optical drive board cable Spare part number L22540-001 L22524-001 Before removing the optical drive board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 32). 2. Remove the optical drive (see Optical drive on page 33). 3. Remove the bottom cover (see Bottom cover on page 37). 4. Remove the battery (see Battery on page 40). Remove the optical drive board: 1. Disconnect the cable from the ZIF connector on the optical drive board (1). 2. Remove the two Phillips M2.0 × 3.0 screws (2), and then remove the board from the computer (3). Reverse this procedure to replace the optical drive board. Component replacement procedures 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Optical drive board
Table 6-10
Optical drive board and cable descriptions and part numbers
Description
Spare part number
Optical drive board
L22540-001
Optical drive board cable
L22524-001
Before removing the optical drive board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
32
).
2.
Remove the optical drive (see
Optical drive
on page
33
).
3.
Remove the bottom cover (see
Bottom cover
on page
37
).
4.
Remove the battery (see
Battery
on page
40
).
Remove the optical drive board:
1.
Disconnect the cable from the ZIF connector on the optical drive board
(1)
.
2.
Remove the two Phillips M2.0 × 3.0 screws
(2)
, and then remove the board from the computer
(3)
.
Reverse this procedure to replace the optical drive board.
Component replacement procedures
51