HP OMEN 15-dh1000 Maintenance and Service Guide - Page 60

USB board, Disconnect the cable from the ZIF connector on the USB board

Get HP OMEN 15-dh1000 PDF manuals and user guides View all HP OMEN 15-dh1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

USB board Table 6-9 USB board description and part number Description USB board USB board cable Spare part number L22538-001 L22522-001 Before removing the USB board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 32). 2. Remove the optical drive (see Optical drive on page 33). 3. Remove the bottom cover (see Bottom cover on page 37). 4. Remove the battery (see Battery on page 40). Remove the USB board: 1. Disconnect the cable from the ZIF connector on the USB board (1). 2. Remove the two Phillips M2.0 × 3.0 screws (2), and then remove the board from the computer (3). Reverse this procedure to replace the USB board. 50 Chapter 6 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
USB board
Table 6-9
USB board description and part number
Description
Spare part number
USB board
L22538-001
USB board cable
L22522-001
Before removing the USB board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
32
).
2.
Remove the optical drive (see
Optical drive
on page
33
).
3.
Remove the bottom cover (see
Bottom cover
on page
37
).
4.
Remove the battery (see
Battery
on page
40
).
Remove the USB board:
1.
Disconnect the cable from the ZIF connector on the USB board
(1)
.
2.
Remove the two Phillips M2.0 × 3.0 screws
(2)
, and then remove the board from the computer
(3)
.
Reverse this procedure to replace the USB board.
50
Chapter 6
Removal and replacement procedures for authorized service provider parts