HP Officejet 7200 Users Guide - Page 135

Set up your network, Switch from a USB connection to a network connection - all in one printer series software

Page 135 highlights

Set up your network 13 Set up your network This chapter describes how to connect your HP All-in-One to an Ethernet network so that you can share your HP All-in-One with other computers. Also included are examples of recommended networks and network management information. If you are connecting your HP All-in-One to a network for the first time or you want a direct USB connection instead, please see the printed Setup Guide that came with your HP All-inOne. Use this chapter to help you find information on the following topics: ● Switch from a USB connection to a network connection ● Choose a recommended Ethernet network ● Connect to an Ethernet network ● Install the software for a network connection ● Connect additional computers ● Manage your network ● Network glossary Note For definitions of network terms used in this chapter, see the Network glossary. Switch from a USB connection to a network connection If you first install your HP All-in-One with a USB connection, you can later switch to a network connection. To switch a USB connection to a network connection 1. Unplug the USB connection from the back of your HP All-in-One. 2. Install the software, as described in Install the software for a network connection. 3. When the installation is complete, access the printer icons on your computer as follows: - For Windows XP: Open the Printers and Faxes folder. - For Windows 9.x or Windows 2000: Open the Printers folder. - For Macintosh OS X: Open the Printer Setup Utility in the Utilities list. 4. Check to see if the USB printer icon for your HP All-in-One is there. If it is, delete it. Choose a recommended Ethernet network Use this section to help you identify what kind of Ethernet network you already have in place or want to set up. Each network shown here uses a device, such as an Ethernet router, to connect the network elements. A network connected in this manner is called an infrastructure network. An Ethernet network provides superior performance, reliability, and network security. Ethernet networks might or might not be connected to the Internet. If you place your HP All-in-One on an Ethernet network connected to the Internet, it is recommended that you use a gateway so that the IP address for the HP All-in-One is assigned dynamically through Dynamic Host Configuration Protocol (DHCP). A gateway can either be a router or a Windows computer running Internet Connection Sharing (ICS). 132 HP Officejet 7200 All-in-One series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240

13
Set up your network
This chapter describes how to connect your HP All-in-One to an Ethernet network so
that you can share your HP All-in-One with other computers. Also included are
examples of recommended networks and network management information. If you are
connecting your HP All-in-One to a network for the first time or you want a direct USB
connection instead, please see the printed Setup Guide that came with your HP All-in-
One.
Use this chapter to help you find information on the following topics:
Switch from a USB connection to a network connection
Choose a recommended Ethernet network
Connect to an Ethernet network
Install the software for a network connection
Connect additional computers
Manage your network
Network glossary
Note
For definitions of network terms used in this chapter, see the
Network
glossary
.
Switch from a USB connection to a network connection
If you first install your HP All-in-One with a USB connection, you can later switch to a
network connection.
To switch a USB connection to a network connection
1.
Unplug the USB connection from the back of your HP All-in-One.
2.
Install the software, as described in
Install the software for a network connection
.
3.
When the installation is complete, access the printer icons on your computer as
follows:
For
Windows XP
: Open the
Printers and Faxes
folder.
For
Windows 9.x or Windows 2000
: Open the
Printers
folder.
For
Macintosh OS X
: Open the
Printer Setup Utility
in the
Utilities
list.
4.
Check to see if the USB printer icon for your HP All-in-One is there. If it is, delete it.
Choose a recommended Ethernet network
Use this section to help you identify what kind of Ethernet network you already have in
place or want to set up. Each network shown here uses a device, such as an Ethernet
router, to connect the network elements. A network connected in this manner is called
an
infrastructure
network. An Ethernet network provides superior performance,
reliability, and network security.
Ethernet networks might or might not be connected to the Internet. If you place your
HP All-in-One on an Ethernet network connected to the Internet, it is recommended
that you use a gateway so that the IP address for the HP All-in-One is assigned
dynamically through Dynamic Host Configuration Protocol (DHCP). A gateway can
either be a router or a Windows computer running Internet Connection Sharing (ICS).
132
HP Officejet 7200 All-in-One series
Set up your network