HP Officejet g85 HP OfficeJet G Series - (English) User Guide for Macintosh - Page 40
Stop copying - reset
View all HP Officejet g85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
AvMac.book Page 36 Friday, June 23, 2000 10:34 AM HP OfficeJet G Series All copy settings selected on the front panel are reset two minutes after the unit completes the copy job unless you save the settings as the default settings. Settings that you set in the softwares Copy dialog box are reset immediately after you process the job. (Settings changed in the softwares Copy Settings dialog box remain in effect until you change them again. For more information, see Change settings for all future copy jobs in the OnScreen Guide.) Initiate the process from your HP OfficeJet Follow these steps to start a copy job from your unit. 1 Load the input tray with the appropriate paper. For more information, see Load paper or transparency film, or load originals. 2 If you are using anything other than plain paper, press Paper Type, press X (>) until the appropriate type appears, and then press ENTER to select it. For more information, see Recommended paper-type settings for copying in the OnScreen Guide. 3 Load your original. For more information, see Load originals on the glass or Load originals in the automatic document feeder (ADF). 4 If you want to make more than one copy (the default), press Number of Copies, and then use the keypad to enter the number of copies. For more information, see Set the number of copies in the OnScreen Guide. 5 Change any other applicable settings, such as reduction, enlargement, or special features. 6 Press Start Copy, Black or Color. Initiate the process from your Macintosh Follow these steps to start a copy job from your Macintosh. 1 Load the input tray with the appropriate paper. For more information, see Load paper or transparency film, or load originals. 2 Load your original. For more information, see Load originals on the glass or Load originals in the automatic document feeder (ADF). 3 In the Director, click Copy. The Copy dialog box appears. 4 Change any applicable settings and click Start Copy to start the copy job. Stop copying You can stop a copy job from your unit or your Macintosh. To do so, press Cancel on the front panel. 36 Chapter 9Use the copy features