HP P3005 Service Manual - Page 153

Control panel message 13.XX.YY JAM INSIDE REAR DOOR alternates with Clear jam then press 13.XX.YY JAM INSIDE TOP COVER alternates with Remove print cartridge 20-INSUFFICIENT MEMORY alternates with To continue press 21 PAGE TOO COMPLEX alternates with To continue press Description Recommended action 5. Reinstall the duplexer. 6. Open and close the cartridge door to clear the error message. A jam has occurred in the duplex reversing 1. Press to see step-by-step area. information. 2. Open the rear door, and then remove all media found. 3. Close the rear door. 4. Open and close the cartridge door to clear the error message. A jam has occurred in the registration assembly area. 1. Press the to see step-by-step information. 2. Open the cartridge door, and then remove the print cartridge. 3. Remove all media found. 4. Lift the metal flap, and then remove any media remaining. 5. Reinstall the print cartridge, and then close the cartridge door. 6. If the message persists, verify that the flat ribbon cable at the bottom of the ECU is connected correctly. 7. To exit, press The device has received more data from the 1. computer than fits in available memory. Press to continue printing. NOTE Data will be lost. 2. Reduce the complexity of the print job to avoid this error. 3. Adding memory to the device may allow printing of more complex pages. The page-compression process is too slow 1. for the device. Some data may be lost on the page. 2. Press to see step-by-step information. To print the job with some data loss, press to exit the message, and then press . If data is lost, simplify the page content to reduce its complexity. 3. To exit, press . ENWW Control-panel messages 135