HP PL Class450/500/550/600/650/700/750 HP Visualize Linux Workstation - User's - Page 20

Connecting to a Network, Setting Up and Using Your HP Visualize Linux Workstation

Get HP PL Class450/500/550/600/650/700/750 PDF manuals and user guides View all HP PL Class450/500/550/600/650/700/750 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Setting Up and Using Your HP Visualize Linux Workstation Connecting to a Network Connecting to a Network Your HP VISUALIZE Linux Workstation has a 10BT/100TX LAN interface adapter. The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations and automatically detects which network type is being used. 1. Connect the RJ-45 plug on your network cable to the LAN connector on the LAN Adapter. Push the plug into the connector until the plug clicks into place. The board shown here is a combined SCSI/LAN board. 2. Attach the other end of the LAN cable to a hub (or into a wall socket that is connected to a hub). For further instructions on configuring your network connection, refer to the section "Configuring Your Network Connection" in the chapter "Technical Information." Let your Network Administrator know that you are connecting your Workstation to the network. 4 Chapter 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
4
Chapter 1
Setting Up and Using Your HP Visualize Linux Workstation
Connecting to a Network
Connecting to a Network
Your HP V
ISUALIZE
Linux Workstation has a 10BT/100TX LAN interface
adapter.
The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations and
automatically detects which network type is being used.
1.
Connect the RJ-45 plug on your network cable to the LAN connector
on the LAN Adapter. Push the plug into the connector until the plug
clicks into place.
2.
Attach the other end of the LAN cable to a hub (or into a wall socket
that is connected to a hub).
For further instructions on configuring your network connection, refer to
the
section
“Configuring
Your
Network
Connection”
in
the
chapter
“Technical Information.”
Let
your
Network
Administrator
know
that
you
are
connecting
your Workstation to the network.
The board shown here is a
combined SCSI/LAN board.