HP Pavilion 13-r000 HP Pavilion x2 Detachable Notebook PC HP Split x2 Detachab - Page 40
USB/audio board
View all HP Pavilion 13-r000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
USB/audio board Description USB/audio board (includes cable) Spare part number 765928-001 Before removing the USB/audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 25). 5. Remove the dock bottom cover (see Dock bottom cover on page 26). 6. Disconnect the battery cable (see Battery cable on page 28). Remove the USB/audio board: 1. Remove the tape from atop the connector (1). 2. Disconnect the cable (2) from the board. 3. Remove the two Phillips PM2.0×3.0 screws (3) that secure the USB/audio board to the dock. 4. Rotate the side of the board up and remove it from the dock (4). NOTE: When installing the USB/audio board, make sure to insert the notches in the board onto the posts on the computer (5). 30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts