HP Pavilion 13-r000 HP Pavilion x2 Detachable Notebook PC HP Split x2 Detachab - Page 60
Power connector/SIM board, Remove the cable from the clips built into the tablet
View all HP Pavilion 13-r000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Power connector/SIM board Description SIM module for use in models without WWAN SIM module for use in models with WWAN Spare part number 779122-001 790020-001 Before removing the power connector/SIM board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 25). 5. Remove the tablet cover (see Tablet cover on page 43). 6. Disconnect the battery cable (see Battery cable on page 45). Remove the power connector/SIM board: 1. Disconnect the power connector/SIM board cables from the system board (1)(2). 2. Remove the cable from the clips built into the tablet (3) 3. Remove the Phillips PM2.0×2.0 broadhead screw (4) and the two the Phillips PM2.0×3.0 screws (5) that secure the board to the tablet. 4. Lift the bracket from atop the connector (6). 50 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts