HP Pavilion 13-s000 Pavilion x360 Convertible PC model numbers: 13-s000 throug - Page 30

CAUTION, disconnect the keyboard cable from the system board.

Get HP Pavilion 13-s000 PDF manuals and user guides View all HP Pavilion 13-s000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

4. Remove the 13 Phillips PM2.5×6.6 screws that secure the keyboard/top cover to the bottom cover. 5. Turn the computer right side up with the front toward you. 6. Open the computer. CAUTION: Do not completely separate the keyboard/top cover from the bottom cover in the next step. There are 2 ribbon cables connecting the keyboard/top cover to the system board that can be damaged if too much separation is achieved. 7. Lift the front edge (1) of the keyboard/top cover until it separates from the bottom cover. 8. Release the zero insertion force (ZIF) connector (2) to which the keyboard cable is attached, and then disconnect the keyboard cable from the system board. 9. Release the ZIF connector (3) to which the TouchPad cable is attached, and then disconnect the TouchPad cable from the system board. 24 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
4.
Remove the 13 Phillips PM2.5×6.6 screws that secure the keyboard/top cover to the bottom cover.
5.
Turn the computer right side up with the front toward you.
6.
Open the computer.
CAUTION:
Do not completely separate the keyboard/top cover from the bottom cover in the next step.
There are 2 ribbon cables connecting the keyboard/top cover to the system board that can be damaged
if too much separation is achieved.
7.
Lift the front edge
(1)
of the keyboard/top cover until it separates from the bottom cover.
8.
Release the zero insertion force (ZIF) connector
(2)
to which the keyboard cable is attached, and then
disconnect the keyboard cable from the system board.
9.
Release the ZIF connector
(3)
to which the TouchPad cable is attached, and then disconnect
the TouchPad cable from the system board.
24
Chapter 5
Removal and replacement procedures