HP Pavilion 13-s000 Pavilion x360 Convertible PC model numbers: 13-s000 throug - Page 52
Power connector cable
View all HP Pavilion 13-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
3. Remove the power button board (3) and cable. Reverse this procedure to install the power button board. Power connector cable Description Power connector cable Spare part number 809824-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 22). 5. Disconnect the battery cable from the system board (see Battery on page 25). 6. Remove the WLAN module (see WLAN module on page 29). 7. Remove the system board (see System board on page 31). 8. Remove the display assembly (see Display assembly on page 38). Remove the power connector cable: 1. Slide the power connector cable (1) out of the cavity in the base enclosure. 46 Chapter 5 Removal and replacement procedures