HP Pavilion 13-s000 Pavilion x360 Convertible PC model numbers: 13-s000 throug - Page 32

on the right side of the battery to lift the right side of the battery until it rests

Page 32 highlights

2. Remove the four PM2.5×4.4 screws (1) that secure the battery to the base enclosure. 3. Detach the connector board cable (1) from the battery. (The connector board cable is attached to the battery with double-sided adhesive.) 4. Use the release slot (2) on the right side of the battery to lift the right side of the battery until it rests at an angle. 5. Remove the battery (3) by sliding it up and to the right. Reverse this procedure to install the battery. 26 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

2.
Remove the four PM2.5×4.4 screws
(1)
that secure the battery to the base enclosure.
3.
Detach the connector board cable
(1)
from the battery. (The connector board cable is attached to
the battery with double-sided adhesive.)
4.
Use the release slot
(2)
on the right side of the battery to lift the right side of the battery until it rests at
an angle.
5.
Remove the battery
(3)
by sliding it up and to the right.
Reverse this procedure to install the battery.
26
Chapter 5
Removal and replacement procedures