HP Pavilion 15-cd000 Maintenance and Service Guide - Page 63

USB port board cable, Display assembly, Turn the system board upside down with the front toward you.

Get HP Pavilion 15-cd000 PDF manuals and user guides View all HP Pavilion 15-cd000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

USB port board cable NOTE: The USB port board spare part kit does not include the USB port board cable. The USB port board cable is available using spare part numbers 926842-001. Before removing the USB port board cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the optical drive (see Optical drive on page 34), and then remove the following components: a. Bottom cover (see Bottom cover on page 35) b. Battery (see Battery on page 37) c. Solid-state drive (see Solid-state drive on page 41) d. Fan (see Fan on page 47) e. System board (see System board on page 48) Remove the USB port board cable: 1. Turn the system board upside down with the front toward you. 2. Release the ZIF connector (1) to which USB port board cable is connected, and then disconnect the USB port board cable (2) from the audio jack board. 3. Remove the USB port board cable. Reverse this procedure to install the USB port board cable. Display assembly NOTE: The display assembly is spared at the subcomponent level. For display assembly spare part information, see the individual removal subsections. Component replacement procedures 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
USB port board cable
NOTE:
The USB port board spare part kit does not include the USB port board cable. The USB port
board cable is available using spare part numbers 926842-001.
Before removing the USB port board cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the optical drive (see
Optical drive
on page
34
), and then remove the following components:
a.
Bottom cover (see
Bottom cover
on page
35
)
b.
Battery (see
Battery
on page
37
)
c.
Solid-state drive (see
Solid-state drive
on page
41
)
d.
Fan (see
Fan
on page
47
)
e.
System board (see
System board
on page
48
)
Remove the USB port board cable:
1.
Turn the system board upside down with the front toward you.
2.
Release the ZIF connector
(1)
to which USB port board cable is connected, and then disconnect the USB
port board cable
(2)
from the audio jack board.
3.
Remove the USB port board cable.
Reverse this procedure to install the USB port board cable.
Display assembly
NOTE:
The display assembly is spared at the subcomponent level. For display assembly spare part
information, see the individual removal subsections.
Component replacement procedures
55