HP Pavilion 17-f000 Maintenance and Service Guide - Page 100
on the left side base of, and disconnect the display connector
View all HP Pavilion 17-f000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Before removing the display panel, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 76). 5. Remove the optical drive. 6. Remove the top cover from the base enclosure (see Base enclosure on page 80). Remove the display panel: 1. Open the computer. 2. Disengage the display cable (1) and disconnect the display connector (2) on the left side base of the display panel. 3. On the right side, disconnect the WLAN cable (3) and carefully remove the cable from the retaining tabs (4). 90 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts