HP Pavilion 17-f000 Maintenance and Service Guide - Page 128
Power connector, Disconnect all external devices connected to the computer.
View all HP Pavilion 17-f000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
5. Remove the optical drive. 6. Remove the top cover from the base enclosure (see Base enclosure on page 80). 7. Remove the WLAN module (see WLAN module on page 96). 8. Remove the subwoofer (see Subwoofer (select models only) on page 102). 9. Remove the system board (see System board on page 106). Remove the RTC battery: 1. Turn the system board upside down. 2. Use a thin, non-conductive tool to remove the RTC battery (1) from the socket on the system board. Reverse this procedure to install the RTC battery on computer models. When installing the RTC battery, make sure the "+" sign faces up. Power connector Description For use with HP Pavilion 15 Notebook PC computer models For use with HP Pavilion 17 Notebook PC computer models Spare part number 762507-001 763699-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 76), 118 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts