HP Pavilion 8700 HP Pavilion PC's - PCTEL V.90/K56Flex Series AT Command Guide - Page 11
It accepts 3 numeric sub-parameters, The modem shall send text to the local PC, consisting
View all HP Pavilion 8700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
AT Command Guide ER? The modem shall send text to the local PC, consisting of: +ER: e.g. +ER: 0 +ER=? +ER: (list of supported values) e.g. +ER: (0,1) Value 0 1 Description Error control reporting disabled (No + ER immediate result code trasmitted) Error control reporting enabled (No + ER immediate result code trasmitted) +EB - Break Handling in Error Control Operation +EB = [[, [, ]]] This parameter is used to control the manner of operation of the V.42 operation in the modem. It accepts 3 numeric sub-parameters: : Specifies the type of break to be signaled to the remote modem upon detecting a break from the local PC (see Recommendation V.42 for different break types). : Specifies if the break signal to the remote modem is timed or not. : Specifies the amount of time in tens of milliseconds that a break should be signaled to the local PC when a break indication is received from the remote modem without a break length explicitly indicated. < break_selection > 0 1 2 3 0 1 < default_length> 0 1 to 200 Other Description Ignore break (do not signal to remote modem) Non-expedited, non-destructive Expedited, non-destructive Expedited and destructive Description Any transmitted V.42 L-SIGNAL shall NOT indicate break signal length Any transmitted V.42 L-SIGNAL shall indicate break signal length Description Do not deliver break to local PC Default break length of 0.01 to 2 seconds Higher values may be supported 11 V90K56DOCATC11A