HP Pavilion 8700 HP Pavilion PC's - PCTEL V.90/K56Flex Series AT Command Guide - Page 13
<pending_TD>, <timer>, Modem responds with current settings
View all HP Pavilion 8700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
AT Command Guide +ES? established, disconnect. 5 Error Control (LAPM) Required if LAPM can not be established, disconnect. 6 Error Control (Alternate (MNP)) Required if MNP can not be established, disconnect. +ES=? +ETBM - Call Termination Buffer Management +ETBM = [[,[,]]] This parameter controls the handling of data remaining in the modems buffers upon call termination. It accepts 3 numeric sub-parameters: : Controls how previously-transmitted data remaining in the modems buffers should be handled when the local PC requests disconnection of the call : Controls how previously received data remaining in the modems buffers should be handled when the remote modem disconnects the call : Sets the maximum time limit on how long the modem will attempt to deliver the buffered data before abandoning the attempt and disregarding remaining data. Circuit 109 (Carrier Detect) is held in the ON condition until all pending data is delivered or discarded. 0 1 2 0 1 2 0 to 30 Other Description Discard all buffered data immediately and disconnect Attempt until all data is delivered and acknowledged (ignore timer); if remote modem disconnects, disregard remainder Attempt until all data is delivered and acknowledged; if timer expires or remote modem disconnects, disregard remainder Description Discard all buffered data immediately and disconnect Attempt until all data is delivered (ignore timer); if local PC requests disconnect, disregard remainder Attempt until all data is delivered ; if timer expires or local PC requests disconnect, disregard remainder Description Delivery timer value in seconds Higher values may be supported (reserved for future use) +ETBM? +ETBM: ,, Modem responds with current settings 13 V90K56DOCATC11A