HP Pavilion 8700 HP Pavilion PC's - PCTEL V.90/K56Flex Series AT Command Guide - Page 38

AT Command Guide s t Silence Sent in Voice Receive Mode after the silence detection timer (#VSP) expires and if valid voice has not been detected (#VSS). Handset Off-Hook Sent one time when the local handset transition goes off-hook. End of Stream This code is sent to denote the end of a voice data stream. Shielded Codes (Continued) Code Sent to Modem p r Meaning Terminate Sent during Voice Transmit Mode to indicate that the DTE has finished transmitting a voice message. The Modem completes transmission of any remaining data in the voice transmit buffer before responding with the VCON message and entering Online Voice Command Mode. Cancel Sent during Voice Transmit Mode to indicate that the DTE has finished transmitting a voice message and wants the modem to discard any remaining data in the voice transmit buffer. The modem immediately purges its buffer and then responds with VCON message entering Online Voice Command Mode. Pause Sent during Voice Transmit Mode to force the modem to suspend sending voice data to the selected output device. Any data currently in the voice transmit buffer is saved until either a resume (r), or cancel (), is received, in which case the data is lost. If a is received during the paused state, the modem processes it normally, and also automatically resumes transmission of the data left in the buffer (appended with ). Any other data received from the DTE while in this paused state is placed in the transmit buffer according to available space, with flow control active. Resume Sent during Voice Transmit Mode to force the modem to resume sending voice data to the selected output device. Any data currently in the voice transmit buffer is now played. 38 V90K56DOCATC11A