HP Pavilion dm1-4300 HP Pavilion dm1 Entertainment PC Maintenance and Service - Page 52
protective sleeves must be installed on the antenna connectors
View all HP Pavilion dm1-4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5. Remove the WLAN module by pulling the module away from the slot at an angle (3). NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion into the memory module slot. NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module. 46 Chapter 4 Removal and replacement procedures
5.
Remove the WLAN module by pulling the module away from the slot at an angle
(3)
.
NOTE:
WLAN modules are designed with a notch
(4)
to prevent incorrect insertion into the
memory module slot.
NOTE:
If the WLAN antennas are not connected to the terminals on the WLAN module, the
protective sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
46
Chapter 4
Removal and replacement procedures