HP Pavilion dm1-4300 HP Pavilion dm1 Entertainment PC Maintenance and Service - Page 74
TouchPad button board, TouchPad cable
View all HP Pavilion dm1-4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
TouchPad button board Description TouchPad button board (includes cable) Spare part number 664993-001 Before removing the TouchPad button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40), and then remove the following components: a. Service cover (see WLAN module on page 44) b. Keyboard (see Keyboard on page 55) c. Top cover (see Top cover on page 63) Remove the TouchPad button board and cable: 1. Turn the top cover upside down, with the front edge toward you. 2. Release the ZIF connector to which the TouchPad cable is attached, and then disconnect the TouchPad cable (1) from the TouchPad button board. 3. Remove the two Phillips PM2.0×3.8 screws (2) that secure the TouchPad button board to the top cover. 4. Remove the TouchPad button board (3) and cable. Reverse this procedure to install the TouchPad button board and cable. 68 Chapter 4 Removal and replacement procedures