HP Pavilion dm1-4300 HP Pavilion dm1 Entertainment PC Maintenance and Service - Page 57

Hard drive, Remove the Phillips PM2.5×5.7 screw

Get HP Pavilion dm1-4300 PDF manuals and user guides View all HP Pavilion dm1-4300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, connector cable, isolators, or screws. These components are included in the Hard Drive Hardware Kit, spare part number 664913-001. Description For use in all computer models: 750-GB, 5400-rpm, SATA, 2.5-in 640-GB, 5400-rpm, SATA, 7.0-mm 500-GB, 7200-rpm, SATA, 7.0-mm 320-GB, 7200-rpm, SATA, 7.0-mm 160-GB solid-state drive For use only with computer models equipped with an AMD processor and with WWAN capability: 640-GB, 5400-rpm, SATA, 7.0-mm 500-GB, 5400-rpm, SATA, 7.0-mm 128-GB solid-state drive, FX 128-GB solid-state drive For use only with computer models equipped with an Intel processors: 128-GB solid-state drive Spare part number 644351-001 603785-001 634925-001 634862-002 and 641672-001 659933-001 669300-001 669299-001 675097-001 684905-001 677715-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the service door (see WLAN module on page 44). Remove the hard drive: 1. Disconnect the hard drive connector cable (1) from the system board. 2. Remove the Phillips PM2.5×5.7 screw (2) that secures the hard drive to the computer. 3. Use the tab (3) on the hard drive bracket to lift the left side of the hard drive until it rests at an angle. Component replacement procedures 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket, connector cable,
isolators, or screws. These components are included in the Hard Drive Hardware Kit, spare part
number 664913-001.
Description
Spare part number
For use in all computer models:
750-GB, 5400-rpm, SATA, 2.5-in
644351-001
640-GB, 5400-rpm, SATA, 7.0-mm
603785-001
500-GB, 7200-rpm, SATA, 7.0-mm
634925-001
320-GB, 7200-rpm, SATA, 7.0-mm
634862-002 and
641672-001
160-GB solid-state drive
659933-001
For use only with computer models equipped with an AMD processor and with WWAN
capability:
640-GB, 5400-rpm, SATA, 7.0-mm
669300-001
500-GB, 5400-rpm, SATA, 7.0-mm
669299-001
128-GB solid-state drive, FX
675097-001
128-GB solid-state drive
684905-001
For use only with computer models equipped with an Intel processors:
128-GB solid-state drive
677715-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
40
).
5.
Remove the service door (see
WLAN module
on page
44
).
Remove the hard drive:
1.
Disconnect the hard drive connector cable
(1)
from the system board.
2.
Remove the Phillips PM2.5×5.7 screw
(2)
that secures the hard drive to the computer.
3.
Use the tab
(3)
on the hard drive bracket to lift the left side of the hard drive until it rests at
an angle.
Component replacement procedures
51