HP Pavilion dm1-4300 HP Pavilion dm1 Entertainment PC Maintenance and Service - Page 77
Power connector cable, and then remove the following components
View all HP Pavilion dm1-4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2. Remove the system board (2) by sliding it up and to the left at an angle. Reverse this procedure to install the system board. Power connector cable Description Power connector cable (includes bracket) Spare part number 664995-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40), and then remove the following components: a. Service cover (see WLAN module on page 44) b. Keyboard (see Keyboard on page 55) c. Top cover (see Top cover on page 63) d. System board (see System board on page 69) Component replacement procedures 71