HP Pavilion tx1100 HP Pavilion tx1000 Entertainment PC - Maintenance and Servi - Page 45
The edge of the module opposite the socket rises away from the computer., Pull the WWAN module
View all HP Pavilion tx1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
WWAN module Description WWAN module Spare part number 442023-001 Before removing the WWAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 36). 5. Remove the hard drive cover (see Hard drive on page 38). Remove the WWAN module: 1. Disconnect the WWAN antenna cables (1) from the WWAN module. NOTE: The red WWAN antenna cable is connected to the WWAN module "Main" terminal. The blue WWAN antenna cable is connected to the WWAN module "Aux" terminal. 2. Remove the two Phillips PM2.0×4.0 screws (2) that secure the WWAN module to the computer. (The edge of the module opposite the socket rises away from the computer.) 3. Pull the WWAN module (3) away from the socket at an angle and remove it. NOTE: WWAN modules are designed with a notch (4) to prevent incorrect installation into the WWAN module socket. Reverse this procedure to install the WWAN module. 40 Chapter 5 Removal and replacement procedures ENWW