HP Pavilion tx1100 HP Pavilion tx1000 Entertainment PC - Maintenance and Servi - Page 68
Power switch assembly, Remove the Phillips PM2.0×4.0 screw
View all HP Pavilion tx1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Power switch assembly Description Power switch assembly (includes power switch board cable and actuator switch) Spare part number 441142-001 Before removing the power switch assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 36). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 42) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on page 50) e. Display assembly (see Display assembly on page 52) f. Top cover (see Top cover on page 59). Remove the power switch assembly: 1. Remove the two Phillips PM2.0×4.0 screws (1) that secure the power switch board to the base enclosure. 2. Remove the Phillips PM2.0×4.0 screw (2) that secures the display release hook assembly to the base enclosure. ENWW Component replacement procedures 63