HP Pavilion tx1100 HP Pavilion tx1000 Entertainment PC - Maintenance and Servi - Page 77
System board see, Power switch assembly see
View all HP Pavilion tx1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Before removing the fan/heat sink assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 36). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Memory module compartment cover (see Memory module on page 43) c. Optical drive (see Optical drive on page 42) d. Keyboard (see Keyboard on page 47) e. Switch cover (see Switch cover on page 50) f. Display assembly (see Display assembly on page 52) g. Top cover (see Top cover on page 59) h. Power switch assembly (see Power switch assembly on page 63) i. System board (see System board on page 66) Remove the fan/heat assembly: 1. Disconnect the fan cable (1) from the system board. 2. Remove the four Phillips PM2.0×5.0 screws (2) that secure the fan/heat sink assembly to the system board. 72 Chapter 5 Removal and replacement procedures ENWW