HP Pavilion zt1200 HP Pavilion ze1200 and xf300 Series Notebook PCs - Troubles - Page 35

Removing the Hard Disk Drive

Page 35 highlights

Removing the Hard Disk Drive Table 2. Hard Disk Drive Replacement Part Numbers Description HDD-20GB 9.5mm, IBM ATA100 FDB HDD-20GM 9.5mm, TOSH ATA100 FDB HDD-30.0GB 9.5mm, IBM ATA100 FDB (Cascade) HDD-30BG 9.5mm, TITAN Toshiba ATA100 (TITAN) Tray Assy, HDD Part Number 0950-4318 0950-4287 0950-4319 0950-4360 Exchange Part Number F3257-69501 F3476-69002 F3414-69500 F3414-69501 F5398-60914 Required Equipment • #0 Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter (if present), and remove the notebook's battery. 2. Remove both hard drive retaining screws from the bottom of the notebook. Screws, M2.5×4mm Figure 8. Removing the Hard Disk Drive 3. Carefully remove the hard drive from of the notebook. 4. Remove all four screws from the tray and drive case, then remove the drive from the tray. ze1000 Series Troubleshooting and Self-Repair Guide Removing and Replacing Parts 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

ze1000 Series Troubleshooting and Self-Repair Guide
Removing and Replacing Parts
35
Removing the Hard Disk Drive
Table 2. Hard Disk Drive Replacement Part Numbers
Description
Part Number
Exchange Part Number
HDD-20GB 9.5mm, IBM ATA100 FDB
0950-4318
F3257-69501
HDD-20GM 9.5mm, TOSH ATA100 FDB
0950-4287
F3476-69002
HDD-30.0GB 9.5mm, IBM ATA100 FDB (Cascade)
0950-4319
F3414-69500
HDD-30BG 9.5mm, TITAN Toshiba ATA100 (TITAN)
0950-4360
F3414-69501
Tray Assy, HDD
F5398-60914
Required Equipment
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter (if present), and remove the notebook
s battery.
2. Remove both hard drive retaining screws from the bottom of the notebook.
Figure 8. Removing the Hard Disk Drive
3. Carefully remove the hard drive from of the notebook.
4. Remove all four screws from the tray and drive case, then remove the drive from the tray.
Screws,
M2.5
×
4mm