HP Presario CQ57-200 Compaq Presario CQ57 Notebook PC - Maintenance and Servic - Page 76
Lift the right side of the system board, until it rests at an angle.
View all HP Presario CQ57-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
● Fan and heat sink (see Fan/heat sink assembly on page 72) ● Processor (see Processor on page 77) Remove the system board: 1. Disconnect the optical drive connector cable from the system board. 2. Remove the Phillips PM2.5×6.0 screw (1) that secures the system board to the base enclosure. 3. Lift the right side of the system board (2) until it rests at an angle. 68 Chapter 4 Removal and replacement procedures
●
Fan and heat sink (see
Fan/heat sink assembly
on page
72
)
●
Processor (see
Processor
on page
77
)
Remove the system board:
1.
Disconnect the optical drive connector cable from the system board.
2.
Remove the Phillips PM2.5×6.0 screw
(1)
that secures the system board to the base enclosure.
3.
Lift the right side of the system board
(2)
until it rests at an angle.
68
Chapter 4
Removal and replacement procedures