HP Presario V6600 Compaq Presario V6500, V6600, and V6700 Notebook PCs - Maint - Page 58
Optical drive, Remove the Phillips PM2.5×7.0 screw
View all HP Presario V6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Optical drive NOTE: All optical drive spare part kits include an optical drive bezel. Description For use in computer models with Intel processors: Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double-Layer (DL) support DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive DVD/CD-RW Combo Drive For use in computer models with AMD processors: DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe DVD/CD-RW Combo Drive Spare part number 462453-001 446505-001 446504-001 446503-001 449934-001 449936-001 455076-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). Remove the optical drive: 1. Position the computer with right side toward you. 2. Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer. 3. Insert a thin tool, such as a paper clip (2), into the disc tray release access. (The optical drive disc tray is partially ejected from the optical drive.) 4. Use the disc tray frame to slide the optical drive (3) out of the computer. 50 Chapter 4 Removal and replacement procedures