HP ProDesk 400 G5 Micro Maintenance and Service Guide - Page 41
Front bezel, away from the computer chassis.
![]() |
View all HP ProDesk 400 G5 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Front bezel 1. Prepare the computer for disassembly (see Preparation for disassembly on page 31). 2. Remove the access panel (see Access panel on page 32). 3. Detach the three clips (1) on the top edge of the front bezel from the tabs on the computer chassis. 4. Swing the top edge of the front cover (2) away from the computer chassis. 5. Remove the front bezel. Reverse this procedure to install the front bezel. Front bezel 35
![](/manual_guide/products/hewlettpackard-prodesk-400-g5-micro-maintenance-service-guide-04d2e03/41.png)
Front bezel
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
31
).
2.
Remove the access panel (see
Access panel
on page
32
).
3.
Detach the three clips
(1)
on the top edge of the front bezel from the tabs on the computer chassis.
4.
Swing the top edge of the front cover
(2)
away from the computer chassis.
5.
Remove the front bezel.
Reverse this procedure to install the front bezel.
Front bezel
35